Sign In | Register | About | Contact
You are here: Home > OntologyDashboard > Classes > CID-01594
 

CID-01594: Elbow, Replacement, 200A, Loadbreak

Super-Class:
  200A, Loadbreak Seperable Cable Accessories
Class Name: Elbow, Replacement, 200A, Loadbreak
Sub-Classes:
Assembly Tool, Hex, Separable Insulated Connectors
 
Spanner Wrench, 600A Deadbreak
 
IEEE 386: Standard for Separable Insulated Connector Systems for Power Distribution Systems above 600 V
 
Summary: Elbow, Replacement, 200A, Loadbreak

Summary

The replacement 200A loadbreak elbow has a lengthened compression lug and housing. The Replacement Elbow accommodates cables that are too short to be connected with a standard elbow.

The replacement elbow is typically needed for the following applications:

[1] [2]

Pictures

15kV & 25kV

Elastimold Elastimold
elastimold200A15replacementelbow.png elastimold200A25replacementelbow.png
15kV Class, 95kV BIL apparatus, extended length housing and compression lug + 10-1/2 (266.7 mm), Fully shielded, fully submersible molded rubber housing, 100% Peroxide-cured insulation, Provision for hot stick operation, Provision for ground wire connection, Wide cable range with minimum number of cable sizes, Non-corrosive capacitive test point 25kV Class, 125kV BIL apparatus, Extended length housing and compression lug + 10-1/2 (266.7 mm), Fully shielded, fully submersible molded rubber housing, 100% Peroxide-cured insulation, Provision for hot stick operation, Provision for ground wire connection, Wide cable range with minimum number of cable sizes, Non-corrosive capacitive test point

Drawings

Manufacturers

Voltage (kV) Test Point Integral Jacket Seal Manufacturer Manufacturer Number (Housing) Other Characteristics
15 No No Elastimold 161LR  

References

  1. Transmission & Distribution Material Stock Catalog, Chelan County PUD, 4/25/2012
  2. Underground Construction Standard, National Grid ST. 44.00.001, 2007

About | Legal | Privacy
Copyright 2015-2017 Power Quality Network.